“The No. 6 Composites Gravel Correct Fork was born from the needs of today’s gravel racer and extreme explorer. With an incredible 63mm x 700 (2.5”) tire clearance, fender mounts, and 3-pack accessory mounts, the fork is ready to tackle all conditions and terrains. The Gravel Correct Fork features suspension-corrected geometry, providing riders with a direct swap to a rigid gravel fork while maintaining geometry and handling characteristics. When paired with a hydraulic quick disconnect, swapping forks simply requires ‘unplugging’ one fork from the brake line and plugging the other in without the need to re-route and bleed cables.” – No. 6 Composites
“To ensure the Gravel Correct Fork can handle the increased demands of the rowdier terrain the massive tire clearance allows, No. 6 developed their testing system, iSOCorrect. This new testing system increases the standard impact and ISO 4210 fork testing standards by 25%.”
Key Features
- Steerer tube length: 350mm
- Material: Full Carbon
- Cable routing: available as both semi-internal entering at the top of the fork leg, or fully internal entering at the steerer
- Rake: 47mm
- Axle-to-crown: 430mm
- Suspension corrected to a sagged 40mm travel
- Axle diameter: 12mm
- Maximum tire clearance: 63mm x 700c / 2.5” (5mm clearance all sides)
- Steerer diameter: 1-⅛” to 1-½” tapered
- Fender mounts: Yes
- Accessory mounts: Yes
- Suspension corrected: Yes
- Dynamo routing: Yes
- Weight approximately 500g with a 350mm uncut steerer
- MSRP: $595
Learn more at the No. 6 Composites Website